|
|
|
Tension/Compression Tap Holders
- Quick-change - push back on the holder sleeve, and the adapter with tool is removable. Press on the end of the adapter nose and the tool is removable - all in a few seconds.
- Smooth stroke - even under full torque load, the tension-compression stroke is full and free.
- Interchangeably - our adapters and holders are interchangeable with TM-Smith quick change holders and adapters.
 |  |
| Item # | Drive Type
| Flange Type
| Shank Size
| Adapter Size
| Tap Adapter Range
| Proj. (A)
| Diameter (B)
| Diamter (C)
| | 77810 | Non-Ball Drive
| Cat V
| 40
| #1
| 0 to 9/16 HT
| 4.88 in.
| 1.25 in.
| 2 in.
| | 77812 | Non-Ball Drive
| Cat V
| 50
| #1
| 1/8 PT
| 4 in.
| 1.25 in.
| 2.75 in.
| | 77813 | Non-Ball Drive
| Cat V
| 40
| #2
| 0 to 7/8 HT
| 5.76 in.
| 1.96 in.
| 2 in.
| | 77815 | Non-Ball Drive
| Cat V
| 50
| #2
| 1/8 - 1/2 PT
| 4.89 in.
| 1.96 in.
| 2.75 in.
| | 77817 | Non-Ball Drive
| Cat V
| 50
| #3
| 13/16 - 1 3/8 HT
| 6.19 in.
| 2.83 in.
| 2.75 in.
| | 77835 | Ball Drive
| Cat V
| 40
| #1
| 0 to 9/16 HT
| 4.88 in.
| 1.25 in.
| 2 in.
| | 77837 | Ball Drive
| Cat V
| 50
| #1
| 1/8 PT
| 4 in.
| 1.25 in.
| 2.75 in.
| | 77856 | Ball Drive
| Cat V
| 40
| #2
| 0 to 7/8 HT
| 5.76 in.
| 1.96 in.
| 2 in.
| | 77858 | Ball Drive
| Cat V
| 50
| #2
| 1/8 - 1/2 PT
| 4.89 in.
| 1.96 in.
| 2.75 in.
| | 77861 | Ball Drive
| Cat V
| 50
| #3
| 13/16 - 1 3/8 HT
| 6.19 in.
| 2.83 in.
| 2.75 in.
|
|
|
|
|
| |
