Collis Toolholder Corp. logo Collis ToolHolder Iowa
   Home     About Us  Process   Request for Quote   Contact Us   Privacy Policy Site Map
Orange-Glo Bullet Products
Orange-Glo BulletEnd Mill Holders  
Orange-Glo BulletShell Mill Holders  
Orange-Glo BulletCollet Chucks  
Orange-Glo BulletCollets  
Orange-Glo BulletTapping  
Orange-Glo BulletMorse & Jacobs Taper Holders  
Orange-Glo BulletMorse & Jacob Drill Chucks  
Orange-Glo BulletCoolant Induced Tool Holders  
Orange-Glo BulletTool Holder Bushings  
Orange-Glo BulletGeneral Tools  
Orange-Glo BulletAccessories  
Orange-Glo Bullet Distributors
Orange-Glo Bullet Sales Representatives
Orange-Glo Bullet Literature
 
 

General Tools
Click on a Product to view details.


Missing Image


Rapid Switch Master Holders

  • Tool changes can be made in just seconds increasing productivity.
  • Collis Rapid Switch Tool Holders are completely interchangeable with Universal Kwik-Switch®.
  • Broad interchangeability reduces collet and holder inventory.
  • Easy operating lock and eject system with minimum overhang.
  • Precisely machined positive drive secondary holders reduce cycle times.
  • Made in the U.S.A.

Missing Image


Rapid Switch Adapters


Missing Image


R8 End Mill Holders


Missing Image


R8 Morse Taper Holders


Missing Image


R8 Jacobs Taper Holders


Missing Image


R8 Collet Chuck


Missing Image


R8 Shell Mill Holders

Arbor Screws and Drive Keys included.

Missing Image


R8 Stub Mill Holders


Missing Image


R8 1" Arbor Spacers


Missing Image


R8 1 1/4" Arbor Spacers


Missing Image


R8 Quick Change Tap Adapter


Missing Image


Reducing Sleeves

  • Adapt small taper shank tools to larger size spindles. Precision ground for excellent concentricity.

Missing Image


Rough Sockets

  • Rough sockets are provided soft to machine a shank connection of your choice. Shank can selectively be heat treated for better wear characteristics.

Missing Image


Extension Sockets

  • Precision ground for excellent concentricity. Extend morse taper spindle and tools. Increase or decrease the morse taper spindle size of your equipment.

Missing Image


Turret Tool Holders

Exclusive Easy-Entry
Turret Tool Holders for Morse Taper Shank Tools - precision ground for excellent concentricity.

Missing Image


Floating Holders

Floating Holders

Full floating action that compensates for the misalignment of the tool to the work piece. Lateral float is 1/32" from centerline. Precision action of the holder provides the drive for the closest tolerance work. These holders are self-centering and internal float members are shielded from the intrusion of chips and dirt. All steel working surfaces as well as shank and holder hole are heat treated to maintain precision of spindles and tools.

Morse tapered hole holders when used with the Split Sleeve Reamer and Tap Drivers offer tooling adaptation, simplified floating action minimizes downtime and maintenance requirements.

Missing Image


Types S Close Center Tap Drivers


Missing Image


Types S Close Center Tap Chucks

For Use With .500 Taper Tap Chucks

A design providing precision where tapping operations on close centers is required. The Collis assembly of tap drivers and chucks allows for easy tapping operations in the "hard-to-reach" areas. This type of assembly eliminates the need for costly pulley taps.

Missing Image


Blank End Arbors

Furnished soft with a precision ground soft Morse Taper Shank. This part can be selectively heat treated after machining.

Missing Image


Lathe Centers for Grinding & Turning

All lathe Centers have 60° points.

Missing Image


Automotive Adjustable Adapter Assemblies

Multiple spindles require the accuracy of precision Acme threads and the concentricity of a precisely ground O.D. and I.D. All adapters are produced to precise automotive standards to maintain maximum spindle performance and minimize tool runout. The lock nut provides the positive positioning desired in the spindle.

Missing Image


Locknuts

The locknut provides the positive positioning stop desired in the spindle.

Missing Image


Automotive Spindle Extension Assemblies Style "A"


Missing Image


Adjustable Spindle Extension Assemblies Style "B"


Missing Image


Automotive Shank Double Angle Collet Holders


Missing Image


Split Sleeve Drill and Reamer Drivers


Missing Image


Center Drill Driver Positive Drive Style


Missing Image


Magic Chucks


Missing Image


Magic Chuck Collets

With Exclusive Easy-Entry

Missing Image


Sta-Tite Tap Holders


Missing Image


Split Sleeve Tap Drivers/Morse Taper

Split Sleeve Tap Drivers/Morse Taper

Collis Tap Drivers utilize the four way split to provide maximum gripping of the tap, to minimize pull-out and to reduce down time. Dimensions follow the automotive specifications.

The square on tap shank engages with the broached square hole in the Tap Driver for a positive drive of the tap. Made from high quality steel and heat treated. Collis Tap Drivers are made to withstand the strain and abuse of production tapping operations. Tap Drivers listed are readily available from stock, sizes not listed can be quoted and supplied on request.

Missing Image


Type-C Close Center Tap Drivers

Small diameter for close work, Collis' special designed extensions in projections of 3 1/4", 3 3/4", 4 5/8", 6", 9", provide a range of holders that utilize standard tap or drill and reamer driver.