Collis Toolholder Corp. logo Collis ToolHolder Iowa
   Home     About Us  Process   Request for Quote   Contact Us   Privacy Policy Site Map
Orange-Glo Bullet Products
Orange-Glo BulletEnd Mill Holders  
Orange-Glo BulletShell Mill Holders  
Orange-Glo BulletCollet Chucks  
Orange-Glo BulletCollets  
Orange-Glo BulletTapping  
Orange-Glo BulletMorse & Jacobs Taper Holders  
Orange-Glo BulletMorse & Jacob Drill Chucks  
Orange-Glo BulletCoolant Induced Tool Holders  
Orange-Glo BulletTool Holder Bushings  
Orange-Glo BulletGeneral Tools  
Orange-Glo BulletAccessories  
Orange-Glo Bullet Distributors
Orange-Glo Bullet Sales Representatives
Orange-Glo Bullet Literature
 
 

Collets
Click on a Product to view details.


Missing Image


E/R Series Collets

ER Chucks are used for precision work.

ER Collets achieve greater grip strength and higher precision than do double angle collets. To use, first insert the collet into the chuck nut by squeezing the collet and pressing its face into the chuck nut collar ring until the collet collar is fully seated. Then load the collet into the chuck, insert a cutting tool and tighten with the appropriate nut wrench. For collet removal, simply squeeze the collet while pulling it from the chuck nut at an angle. Chucks are equipped with a left-handed-threaded stop screw and a chuck nut.
  • Tolerance: Guaranteed to be 0.0002" at the collets' nose.
  • Accuracy: ER collets are the most accurate collets available.

Missing Image


E/R Sealed Collets

ER Chucks are used for precision work.

ER Collets achieve greater grip strength and higher precision than do double angle collets. To use, first insert the collet into the chuck nut by squeezing the collet and pressing its face into the chuck nut collar ring until the collet collar is fully seated. Then load the collet into the chuck, insert a cutting tool and tighten with the appropriate nut wrench.
For collet removal, simply squeeze the collet while pulling it from the chuck nut at an angle. Chucks are equipped with a left-handed-threaded stop screw and a chuck nut.
  • Tolerance: Guaranteed to be 0.0002" at the collets' nose.
  • Accuracy: ER collets are the most accurate collets available.

Missing Image


Single Angle Precision Grip (PG) - 075, 100 and 150 Series


Missing Image


Collet Squeezers

For ease of collet extraction from nut, use Collis Collet Squeezers.

Missing Image


PG Single Angle Collet Sets


Missing Image


TG Sealed Collets


Missing Image


E/R Tap Collets


Missing Image


Acura-Flex 25 Collets

AF collets collapse approximately 1/64"
AF collets are precisely machined to exacting standards. They are a good choice for high speed/high precision milling and drilling operations.
  • Tolerance: Guaranteed to be within 0.0003" at the collets' nose.
  • Accuracy: 3/8" and larger collets are guaranteed accurate to within 0.0005" at 4" out from their noses. Collets smaller than 3/8" are guaranteed accurate to within 0.0005" at a dis tance equal to 4 times the collet I.D.
    Interchangeable with Universal Acura-Flex. Acura-Flex is a registered trademark of Universal Engineering.

Missing Image


Acura-Flex 38 Collets

AF collets collapse approximately 1/64"
AF collets are precisely machined to exacting standards. They are a good choice for high speed/high precision milling and drilling operations.
  • Tolerance: Guaranteed to be within 0.0003" at the collets' nose.
  • Accuracy: 3/8" and larger collets are guaranteed accurate to within 0.0005" at 4" out from their noses. Collets smaller than 3/8" are guaranteed accurate to within 0.0005" at a dis tance equal to 4 times the collet I.D.
    Interchangeable with Universal Acura-Flex.
    Acura-Flex is a registered trademark of Universal Engineering.

Missing Image


Acura-Flex 50 Collets

AF collets collapse approximately 1/64"
AF collets are precisely machined to exacting standards. They are a good choice for high speed/high precision milling and drilling operations.
  • Tolerance: Guaranteed to be within 0.0003" at the collets' nose.
  • Accuracy: 3/8" and larger collets are guaranteed accurate to within 0.0005" at 4" out from their noses. Collets smaller than 3/8" are guaranteed accurate to within 0.0005" at a dis tance equal to 4 times the collet I.D.
    Interchangeable with Universal Acura-Flex.
    Acura-Flex is a registered trademark of Universal Engineering.

Missing Image


Acura-Flex 75 Collets

AF collets collapse approximately 1/64"
AF collets are precisely machined to exacting standards. They are a good choice for high speed/high precision milling and drilling operations.
  • Tolerance: Guaranteed to be within 0.0003" at the collets' nose.
  • Accuracy: 3/8" and larger collets are guaranteed accurate to within 0.0005" at 4" out from their noses. Collets smaller than 3/8" are guaranteed accurate to within 0.0005" at a dis tance equal to 4 times the collet I.D.
    Interchangeable with Universal Acura-Flex.
    Acura-Flex is a registered trademark of Universal Engineering.

Missing Image


Acura-Flex 100 Collets

AF collets collapse approximately 1/64"
AF collets are precisely machined to exacting standards. They are a good choice for high speed/high precision milling and drilling operations.
  • Tolerance: Guaranteed to be within 0.0003" at the collets' nose.
  • Accuracy: 3/8" and larger collets are guaranteed accurate to within 0.0005" at 4" out from their noses. Collets smaller than 3/8" are guaranteed accurate to within 0.0005" at a dis tance equal to 4 times the collet I.D.
    Interchangeable with Universal Acura-Flex.
    Acura-Flex is a registered trademark of Universal Engineering.

Missing Image


Double-Angle Series 300-200-100-180

DA collets collapse approximately 1/64"
DA collets are precisely machined to exacting standards. They are a good choice for drilling and reaming operations.
  • Tolerance: Guaranteed to be within 0.0003" at the collets'nose.
  • DA collets are the best choice for confined areas where a small diameter collet is required.
  • Collis double-angle collets feature 1/32-inch collapse. Concentricity is held to .0003" at nose.

Missing Image


Double Angle Collet Sets

DA collets collapse approximately 1/64"
DA collets are precisely machined to exacting standards. They are a good choice for drilling and reaming operations.
  • Tolerance: Guaranteed to be within 0.0003" at the collets'nose.
  • DA collets are the best choice for confined areas where a small diameter collet is required.

Missing Image


5C Collets

5C collets are manufactured to exacting standards. They are a good choice for milling, drilling and reaming, secondary grinding operations and tool sharpening.
  • Tolerance: Guaranteed to be within 0.0002" at the collets' nose.
  • 5C collets are widely used in machining and work in holding devices and fixtures.

Missing Image


R8 Collets

R8 collets are manufactured to exacting standards. They are a good choice for milling, drilling and reaming, secondary grinding operations and tool sharpening.
  • Tolerance: Guaranteed to be within 0.0002" at the collets' nose.
  • R8 collets are widely used in machining and work in holding devices and fixtures.